Docker Basics: Linking and Volumes

Development

Reading Time: 8 minutes

This article was originally published on Conetix by Tim Butler. With his kind permission, we are sharing it here for Codeship readers.

This is Part Three of my series of Docker articles, which will run you through the basics of Docker and provide an easy-to-follow learning path. If you haven’t gone through the first two articles (What Is Docker? and Docker Basics: A Practical Starter Guide), these will give you an overview of Docker as well as a guide to getting started.

So continuing from the previous article, you should now be able to deploy a container. One of the key features of Docker is the ability to run different services in their own containers. For example, a typical WordPress site would look like this:

Typical WordPress server

Generally, these services are all run on one virtual server (or even a shared hosting environment) where you may or may not have configuration management control. In a Docker environment, we want to separate these into their own containers.

So what’s the advantage of breaking each service out into individual containers? There are two key areas which stand out immediately.

First and foremost is version control. If you have all of the services on the one server, you end up with a complex dependency chain for system-level libraries which can make upgrades and migrations fun. It also means you can upgrade and test different versions of particular services without affecting anything at a system layer. For example, if you’re running WordPress and another PHP-driven system from the same server, you can independently maintain the PHP versions per service.

Secondly, you get the benefit of isolation. Each container can be resource limited via controls over system-level aspects such as memory and CPU. This gives you fine-grained control and will also ensure an even distribution of resources between services on your server. It also limits the potential data leak between services if one happens to be compromised.

Sign up for a free Codeship Account

MySQL

Taking our WordPress scenario, let’s look at how we configure this. Most of the details are the same as deploying a single container but with a few small tweaks. Let’s start by deploying a MySQL server, and, because we can easily tweak the version, let’s go for version 5.7:

docker run --name db-server -d -e MYSQL_ROOT_PASSWORD=Memzoh78 -e MYSQL_DATABASE=wordpressdemo -e MYSQL_USER=conetixdemo -e MYSQL_PASSWORD=Xumkos26 -v /test/mysqldata:/var/lib/mysql mysql:5.6

Note: You’ll first need to create the /test/mysqldata if you use this exact command. You can do this via mkdir -p /test/mysqldata.

If you’ve only run the basic tests from my previous article, you’ll see there’s a lot more complexity to this.

First, let’s go through the new parts:

  • -e MYSQL_ROOT_PASSWORD=Memzoh78
  • -e MYSQL_DATABASE=wordpressdemo
  • -e MYSQL_USER=conetixdemo
  • -e MYSQL_PASSWORD=Xumkos26

The -e sets the environment variables, which can be used to pass setup and configuration parameters to your container. For MySQL, these particular variables set the root password as well as create a database with the username and password specified. As you’ll see further down in the article, these can then be used by other applications to talk to the database.

-v /test/dbdata:/var/lib/mysql

The second part, which is new, is the -v. It sets the volume mapping. Rather than the data remaining within the Docker container, we map the volume to a specific directory within the host server. This way, we can destroy and recreate the container for the MySQL server without any data loss.

For those who are really astute and see this as a “bad” fit for the Docker portability, you are correct. The answer to this is Docker Data Containers, which is another step we need to take care of first. So let’s create a data container for our database:

docker create -v /var/lib/mysql --name db-data mysql:5.6 /bin/true

It’s important to note that while we use the MySQL image for the command to create the data container, it’s simply because we want to reuse the same image and save having to download any more images.

While this is a bit confusing to begin with, we now have a data container which we can reference by name from our MySQL server container. Because all of the data is held in a separate container, we can delete and modify the MySQL server independently of the data. We now have portable containers for the data as well as the services.

Let’s quickly remove the old one and use the new data container reference:

docker stop db-server docker rm db-server

Then:

docker run --name db-server -d -e MYSQL_ROOT_PASSWORD=Memzoh78 -e MYSQL_DATABASE=wordpressdemo -e MYSQL_USER=conetixdemo -e MYSQL_PASSWORD=Xumkos26 --volumes-from db-data mysql:5.6

We now have our database configured and complete.

Adding WordPress

We’ll start off by running the official WordPress image provided by Docker:

docker run --name wordpress-demo --link db-server:mysql -d -e WORDPRESS_DB_NAME=wordpressdemo -e WORDPRESS_DB_USER=conetixdemo -e WORDPRESS_DB_PASSWORD=Xumkos26 -p 8080:80 wordpress

This will download and run the latest version of WordPress, using the latest version available, set the database parameters for WordPress, and link it to the database server automatically. The –link command allows you to automatically establish a connection between the two containers so that they can share information as well as network connections. It’s a very simple command, but it greatly reduces the complexity of your configuration.

This is a very basic WordPress configuration, so it includes Apache within the container as well. Of course, for more complex setups and for further control, this can be split into separate containers as well. For now, we’ll use the container with the combined services.

The -p command mapped the port from the container (port 80) to the host (port 8080) so that we can access it. You should be now able to load http://[boot2dockerip]:8080 and see the setup screen for the demo WordPress site.

If you want to have some real fun, try stopping, deleting and recreating the WordPress container. It should take less than five seconds in total for all of the commands — this is the speed of Docker!

Let’s now add a Docker data container for our WordPress installation. Again, let’s remove the existing container first:

docker stop wordpress-demo 
docker rm wordpress-demo

Now, let’s create the data container:

docker create -v /var/www/html --name wp-data wordpress /bin/true

Then, recreate the WordPress container with the new data container mapping:

docker run --name wordpress-demo --link db-server:mysql -d -e WORDPRESS_DB_NAME=wordpressdemo -e WORDPRESS_DB_USER=conetixdodemo -e WORDPRESS_DB_PASSWORD=Xumkos26 -p 8080:80 --volumes-from wp-data wordpress

Unleashing the Power of Docker

Like the MySQL example, because our data is separate from the WordPress container, we can manipulate the files using another container quite easily. For example, let’s run a backup:

docker run --volumes-from wp-data -v $(pwd):/backup ubuntu tar czf /backup/wordpress-backup.tar.gz /var/www/html

In this example, we used the data container with the WordPress data, mapped our current directory via $(pwd) to /backup, fired up the latest version of Ubuntu and then ran the tar command to backup /var/www/html. If you already had a copy of the latest Ubuntu pulled down, running the command itself should have only taken a few seconds.

Now, let’s test an upgrade of MySQL.

Note: This isn’t something we recommend on a production environment. Instead you should create a new database server and use the proper MySQL export / import method to move the data. However, for the purposes of this article, we’ll show the “wrong” way to do it as a training exercise.

First, we need to stop and remove the container running the database:

docker stop db-server 
docker rm db-server

Remember, our data isn’t within this container, so you’re only removing the service. Now lets create our new MySQL server running 5.7:

docker run --name db-server -d -e MYSQL_ROOT_PASSWORD=Memzoh78 -e MYSQL_DATABASE=wordpressdemo -e MYSQL_USER=conetixdemo -e MYSQL_PASSWORD=Xumkos26 --volumes-from db-data mysql:5.7

We can safely pass the same MYSQL_DATABASE environment variables, as the Docker MySQL script won’t actually delete the database if it already exists.

Because we upgraded database versions, there are a few other quick steps involved. The first is to run the mysql_upgrade command, so that we ensure the schemas are all brought up to the correct version. We can call an executable within the container to do this:

docker exec db-server mysql_upgrade -p'Memzoh78'

Next, because we’ve re-created the database server we need to re-create the WordPress container so that the link picks up the new container. If you browse to the site at the moment, you’d see an error like this:

Error establishing database connection

This is because although the MySQL containers are named the same, they’re treated as completely different entities and the existing link is no longer valid. So, lets quickly rebuild it:

docker stop wordpress-demo 
docker rm wordpress-demo 
docker run --name wordpress-demo --link db-server:mysql -d -e WORDPRESS_DB_NAME=wordpressdemo -e WORDPRESS_DB_USER=conetixdemo -e WORDPRESS_DB_PASSWORD=Xumkos26 -p 8080:80 --volumes-from wp-data wordpress

Apart from the database upgrade script, all of this occurs within seconds.

Conclusion

Hopefully now you understand the process of linking the containers together as well as how volumes and data containers work. Here’s what our end solution looks like:

End solution with Docker

We’ve broken the single server out into separate services, as well as ensured that the services remain immutable so that they can be destroyed and recreated at any time.

There’s still a fair amount of work to configure a basic WordPress instance with the separate database and data containers, but the good news is there’s already a tool to help with this (which we’ll cover another time). Once again, we’ll cover the process to turn your WordPress instance into a single command deploy again with an easy to follow configuration file.

If you have any questions, please feel free to ask in the comments below!

Subscribe via Email

Over 60,000 people from companies like Netflix, Apple, Spotify and O'Reilly are reading our articles.
Subscribe to receive a weekly newsletter with articles around Continuous Integration, Docker, and software development best practices.



We promise that we won't spam you. You can unsubscribe any time.

Join the Discussion

Leave us some comments on what you think about this topic or if you like to add something.

  • Pingback: Create a basic LAMP Server (Linux, Apache, MySQL, and PHP) | HostZone()

  • Kengo Suzuki

    Thank you for great post! I have one question.

    What is the difference of two Data Containers, db-data and wp-data?
    What will be data in them?

    I am aware that db-data is specified as volume in db-server while wp-data is for wordrpress-demo.

    Best Regards

    • There’s no difference in the fact that both are just data containers.

      The db-data will contain the MySQL database files and wp-data will contain the actual WordPress files (including uploads).

      The reason for the data containers is portability. If you simply mapped the volume direct to the underlying host, then to move hosts you need to remember to manually copy the data. By putting them in a container, you now have 100% of the required systems within Docker.

      • Kengo Suzuki

        Got it. Thank you